RB iconIP iconMPE iconRBAS iconRouse icon

V-Tech VERLIFT

السعر من دون ضريبة القيمة المضافة

Favoriteالمفضلة
shareحصة
Save searchحفظ عملية البحث
طباعة

المعلومات

مجموعة المنتجات
رافعات برجية
الماركة/الطراز
V-Tech VERLIFT
سنة الصنع
2009
ساعات الاستخدام
8٬663 ساعة
موقع الماكينة
Bassum, Vokietija، Vilniaus apskritis
البلد
ليتوانيا
Mascus ID
6C1F24ED

السعر

اختيار عملة

تفاصيل

الوزن القائم
6٬134 كج
أقصى قدرة رفع
32٬000 كج
طول الذراع
1٬180 سم
أقصى ارتفاع للرافعة
7٬700 سم
الوزن المقابل
Concrete block
اللون الأصلي
Yellow
نوع الناقلة
بعجلات
مرفقات
With the VERLIFT crane it is possible to build up in very extreme conditions (wind and temperature) safely element by element. During the design time minimisation has also been taken into account for the positioning to object. All parts of the VERLIFT can be transported in a 20’ or 40’ container, which makes the freight forwarding to hard reachable destinations easier. The Crane is also equipped with an optional self-drive-mechanism, in order to be able to move itself. As soon as the object is assembled completely, the VERLIFT is able to lower itself through the windmill. The VERLIFT is designed in a way that the transportation is possible within three (3) 40’ containers (of which one is a 1 flat rack) and the weights and dimensions of it are as follows (last photo). Counterweight: in concrete block in the ground. Calculation standard All calculations were made according to Eurocode.
معلومات أخرى
With the VERLIFT crane it is possible to build up in very extreme conditions (wind and temperature) safely element by element. During the design time minimisation has also been taken into account for the positioning to object. All parts of the VERLIFT can be transported in a 20’ or 40’ container, which makes the freight forwarding to hard reachable destinations easier. The Crane is also equipped with an optional self-drive-mechanism, in order to be able to move itself. As soon as the object is assembled completely, the VERLIFT is able to lower itself through the windmill. The VERLIFT is designed in a way that the transportation is possible within three (3) 40’ containers (of which one is a 1 flat rack) and the weights and dimensions of it are as follows (last photo). Counterweight: in concrete block in the ground. Calculation standard All calculations were made according to Eurocode. The following load factors were considered: static: factor 1,4 dynamic: factor 1,2 Wind speed limit For the maximum admissible wind speed, following values must be respected: Lifting operations: 12 m/s Telescopic manipulation of the tower: 20 m/s Stand-still, boom as high as possible (± 12 m tower free): 60 m/s Stand-still, boom just above the windmill: 114 m/s Temperature limit The temperature during which can be worked must be restricted between -40°C to +60°C, due to the limitations of the cable sheaves.عرض المزيد

UAB WIND TURBINE

Vėtrungių gatvė 87-56 LT-06331 Vilnius, Vilniaus Apskritis ليتوانيا
الحصول على إشعار عبر البريد الإلكتروني
report adالإبلاغ عن إعلان مريب