عدد الإعلانات: 149

مستعمل Caterpillar 908 لوادر

يرجى العثور أدناه على الإعلانات المبوبة لـ # category_top3 المستخدمة للبيع. يمكنك استخدامها حسب سنة الإنتاج أو السعر أو ساعات العمل أو البلد. لتضييق نطاق البحث ، يرجى استخدام شريط التنقل الموجود على الجانب الأيسر.
اقرأ المزيد حول Caterpillar لوادر في قسم العلامات التجارية.

قراءة المزيد إغلاق
عامل التصفية الحالي
إعلانات/ صفحة
  • Caterpillar 908، 2019، لوادر بعجلCaterpillar 908Mناتج المحرك:

    لوادر بعجل
    2019 301 h
    الولايات المتحدة الأمريكية, Colorado Springs, CO
    24h

    120,217 EUR
  • Caterpillar 908، 2017، لوادر بعجلCaterpillar 908Mالتقييم العام (1-5): 4, عدد الملاك السابقين: 1, التاريخ الكامل للخدمة: نعم, تحمل علامة EPA: نعم, تحمل علامة CE: نعم, نوع الكابينة: مقصورة مغطاة, اللون الأصلي: yes, الإطارات الأمامية / محمل السيارة المتبقي: 60%+%, الإطارات الخلفية المتبقية: 60%+%, شروط التوصيل: EXW, Certificates: EPA CE

    لوادر بعجل
    2017 1,740 h
    هولندا, Maarheeze
    7d

    السعر عند توقيع الطلب
  • Caterpillar 908 H، 2009، لوادر بعجلCaterpillar 908 Hالوزن القائم: 7400, تحمل علامة CE: نعم

    لوادر بعجل
    2009 3,244 h
    بلجيكا
    7d

    22,750 EUR
  • تم الترويج
    Caterpillar 908 H، لوادر بعجلCaterpillar 908 H BAK

    لوادر بعجل

    هولندا, Maarheeze

    1,750 EUR
  • تم الترويج
    Caterpillar 908، لوادر بعجلCaterpillar 908M BAK

    لوادر بعجل
    250 h
    هولندا, Maarheeze

    1,500 EUR
  • Caterpillar 908 H، 2011، لوادر بعجلCaterpillar 908H

    لوادر بعجل
    2011 5,280 h
    بولندا, Poznań
    7d

    27,040 EUR
  • Caterpillar 908، الشاسيه والتعليقCaterpillar części / parts CAT 908التقييم العام (1-5): 3

    الشاسيه والتعليق

    بولندا, Kęty

    السعر عند توقيع الطلب
  • Caterpillar 908، 2007، لوادر صغيرةCaterpillar 908

    لوادر صغيرة
    2007 2,200 h
    فرنسا, PAYANT MTP

    26,000 EUR
  • Caterpillar 908، 2016، دلاءCaterpillar Klappschaufel 4in1 906-907-908 VOLVO-L30-L35

    دلاء
    2016
    ألمانيا

    1,650 EUR
  • Caterpillar 908، 2015، لوادر بعجلCaterpillar 908M

    لوادر بعجل
    2015 1,610 h
    السويد, Mora

    السعر عند توقيع الطلب
  • Caterpillar 908 H 2، 2012، لوادر بعجلCaterpillar 908 H 2نوع الكابينة: مقصورة مغطاة, ناتج المحرك: 68

    لوادر بعجل
    2012 2,190 h
    النرويج

    53,976 EUR
  • Caterpillar 908 H 2، 2012، لوادر بعجلCaterpillar 908 H 2

    لوادر بعجل
    2012 3,111 h
    السويد, Eskilstuna

    السعر عند توقيع الطلب
  • Caterpillar 908، 2016، لوادر بعجلCaterpillar 908Mالتقييم العام (1-5): 4, عدد الملاك السابقين: 1, الوزن القائم: 6460, تحمل علامة CE: نعم, نوع الكابينة: مقصورة مغطاة, محرك: CAT C3.3B DIT, سعة البطارية: 1.1, ناتج المحرك: 75, السرعة القصوى: 35, أبعاد النقل (طول×عرض×ارتفاع): 563 x 199 x 265, اللون الأصلي: ja, شروط التوصيل: EXW, Certificates: CE

    لوادر بعجل
    2016 3,188 h
    ألمانيا, Steinach

    38,200 EUR
  • Caterpillar 908، 2006، لوادر بعجلCaterpillar 908

    لوادر بعجل
    2006
    الدنمارك

    23,416 EUR
  • Caterpillar 908، 2018، لوادر بعجلCaterpillar 908M

    لوادر بعجل
    2018 291 h
    الولايات المتحدة الأمريكية, FL

    93,214 EUR
  • Caterpillar 908، 2016، لوادر بعجلCaterpillar 908 M (HPL)

    لوادر بعجل
    2016 1,487 h
    الولايات المتحدة الأمريكية, FL

    58,654 EUR
  • Caterpillar 908، 2017، لوادر بعجلCaterpillar 908M

    لوادر بعجل
    2017 285 h
    الولايات المتحدة الأمريكية, Charlotte, NC

    76,701 EUR
  • Caterpillar 908، 2015، لوادر بعجلCaterpillar 908Mالتقييم العام (1-5): 3

    لوادر بعجل
    2015 1,951 h
    الولايات المتحدة الأمريكية, SC

    69,347 EUR
  • Caterpillar 908 H 2، 2012، لوادر بعجلCaterpillar 908 H 2التقييم العام (1-5): 4, تحمل علامة CE: نعم, نوع الكابينة: مقصورة مغطاة, الإطارات الأمامية / محمل السيارة المتبقي: 80%, الإطارات الخلفية المتبقية: 25%

    لوادر بعجل
    2012 3,200 h
    السويد

    السعر عند توقيع الطلب
  • Caterpillar 908، 2018، لوادر بعجلCaterpillar 908 M (HPL)

    لوادر بعجل
    2018 300 h
    الولايات المتحدة الأمريكية, FL

    94,297 EUR
صفحة
إنشاء التنبيه
Caterpillar 908 specs

  • Caterpillar 908H

    Dimentions
    Bucket
    8.3333 ft in
    6.7585 ft in
    1.4387 yd3
    Dimensions
    1.1155 ft in
    18.8976 ft in
    6.5125 ft in
    8.6942 ft in
    7.1194 ft in
    11.1877 ft in
    2.8051 ft in
    7.1 ft in
    11.2 ft in
    8.7 ft in
    Specifications
    Engine
    2236
    C3.4
    79 hp
    83 hp
    2500 rpm
    203 cu in
    80 hp
    80 hp
    79 hp
    Operational
    14252.8843 lb
    20.6054 gal
    22.1905 gal
    2.6417 gal
    6.3401 gal
    10524.8677 lb
    7.4803 ft in
    12 V
    90 amps
    405/70 R20
    Transmission
    Hydrostatic
    2
    2
    12.4274 mph
    12.4274 mph
    4.3 mph
    12.4 mph
    21.7 mph
    Weights
    14253 lb
    Buckets
    1.1 - 1.5 m3 1.4 - 2.0 yd3
    Hydraulic System
    3400 psi
    21.9263 gal/min
    5 sec
    2 sec
    4 sec
    2 Seconds
    5 Seconds
    2.5 Seconds
    3400 psi
    4 Seconds
    33 gal/min
    22 gal/min
    Operating Specifications
    10566 lb
    1.4 yd3
    405/70 R20
    7510 lb
    52 degrees
    10522 lb
    6592 lb
    5192 lb
    3893 lb
    3756 lb
    Service Refill Capacities
    6.3 gal
    20.6 gal
    22.2 gal
    2.6 gal
    Cab
    SAE J1040 MAY94, ISO 3471-1994
    SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
    Engine Dimensions
    3.7 in
    4.7 in
    203 cu in

  • Caterpillar 908M Ag Handler (2018)

    Dimentions
    Dimensions - With Iso Coupler - Approximate
    5.08 ft in
    9.33 ft in
    10.25 ft in
    4.42 ft in
    10.33 ft in
    5.7 in
    6.4 in
    1.5 ft in
    11 ft in
    12.96 in
    8.58 ft in
    18.25 ft in
    19.92 ft in
    7.08 ft in
    3.42 ft in
    2.83 ft in
    4.33 ft in
    6.67 ft in
    14.67 ft in
    6.75 ft in
    6.5 ft in
    Dimensions - With Ssl Coupler - Approximate
    4.75 ft in
    5.08 ft in
    8.58 ft in
    18.75 ft in
    9.17 ft in
    10.75 ft in
    6.67 ft in
    4.92 ft in
    6.5 ft in
    10.33 ft in
    20 ft in
    7.08 ft in
    6 in
    14.75 ft in
    3.92 ft in
    0.8 in
    1.92 ft in
    2.92 ft in
    10.5 ft in
    6.75 ft in
    12.96 in
    Specifications
    Engine
    *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards.
    74 hp
    68 hp
    73 hp
    68 hp
    69 hp
    73 hp
    Operational
    14402 lb
    Weights
    14402 lb
    Machine with full fuel tank, ROPS/FOPS cab, 80 kg (176 lb) operator, skid steer loader coupler (SSL) and general purpose bucket (GP).
    Buckets
    ISO Coupler - 0.9-1.5 m; SSL Style Coupler - 1.2-2.0 yd
    0.9-1.5 m
    1.2-2.0 yd
    Hydraulic System
    1.3 seconds
    22 gal/min
    3400 psi
    34 gal/min
    5.2 seconds
    2.1 seconds
    3.2 seconds
    Service Refill Capacities
    4.5 gal
    20.6 gal
    18.5 gal
    3 gal
    Maximum Material Densities - General Purpose Bucket
    81 in
    2914 lb/yd
    1.4 yd3
    110 in
    Based on ISO 7546:1983, and rated operating loads at full turn with 100% bucket capacity and SSL coupler.
    Maximum Material Densities - Light Material Bucket
    81 in
    2771 lb/yd
    2 yd3
    111 in
    Based on ISO 7546:1983, and rated operating loads at full turn with 100% bucket capacity and SSL coupler.
    Maximum Material Densities - Multi Purpose Bucket
    81 in
    4060 lb/yd
    1.2 yd3
    110 in
    Based on ISO 7546:1983, and rated operating loads at full turn with 100% bucket capacity and SSL coupler.
    Operating Specifications - Iso Coupler
    1.5 yd3
    4396 lb
    400/70 R20
    10408 lb
    5719 lb
    12337 lb ft
    8789 lb
    51 degrees
    Machine with full fuel tank, ROPS/FOPS cab, 80 kg (176 lb) operator, ISO coupler and general purpose bucket (GP).
    Operating Specifications - Ssl Coupler
    1.5 yd3
    4385 lb
    400/70 R20
    10399 lb
    5336 lb
    10215 lb ft
    8766 lb
    51 degrees
    Machine with full fuel tank, ROPS/FOPS cab, 80 kg (176 lb) operator, SSL coupler and general purpose bucket (GP).
    Travel Speeds
    6.2 mph
    12.4 mph
    21.7 mph

  • Caterpillar 908M (2015)

    Dimentions
    Dimensions - With Iso Coupler - Approximate
    13 in
    10.9 ft in
    8.7 ft in
    4.8 ft in
    4.3 ft in
    3.9 in
    18.5 ft in
    19.7 ft in
    1.5 ft in
    2.6 ft in
    2.8 in
    8.6 ft in
    2.5 ft in
    5.2 ft in
    11.2 ft in
    6.8 ft in
    14.9 ft in
    10.5 ft in
    7.1 ft in
    6.8 ft in
    6.5 ft in
    Dimensions - With Ssl Coupler - Approximate
    13 in
    18.9 ft in
    8.7 ft in
    3.7 in
    1.2 in
    5 ft in
    1.9 ft in
    11.2 ft in
    10.5 ft in
    6.5 ft in
    8.3 ft in
    10.8 ft in
    4.7 ft in
    20.2 ft in
    3 ft in
    2.8 ft in
    5.2 ft in
    6.8 ft in
    15 ft in
    7.1 ft in
    6.75 ft in
    Specifications
    Engine
    74 hp
    201 cu in
    3.7 in
    4.7 in
    *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards.
    Cat C3.3B DIT*
    Net power ratings are tested at the reference conditions for the specified standard.
    Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
    Flywheel per the SAE reference conditions with the fan at maximum speed.
    *Meets U.S. EPA Tier 4 Final/EU Stage IIIB (M Series) or Tier 4 Interim/Stage IIIA (M Series [EUSO]) emission standards.
    74 hp
    68 hp
    73 hp
    68 hp
    69 hp
    73 hp
    74 hp
    192 lb ft
    189 lb ft
    191 lb ft
    The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions.
    73 hp
    74 hp
    Drive Train
    6 mph
    12 mph
    22 mph
    6 mph
    12 mph
    22 mph
    Operational
    14032 lb
    Steering
    3191 psi
    39 degrees
    3.1 in
    1.4 in
    11.8 in
    12 gal/min
    42506 lb ft
    31398 lb ft
    3 s
    <6 turns
    Weights
    14032 lb
    Tires
    Other tire choices available, contact your Cat dealer for details.
    In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
    Weights
    Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort EROPS cab, standard flow hydraulics and skid-steer coupler. - 908M is configured with a 1.1 m3 (1.44 yd3) bucket with bolt-on cutting edge.
    Tires
    Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
    360/80 R20 TRI2 Nokian
    375/75 R20 XZSL Michelin
    400/70 R20 XMCL Michelin
    400/70 R20 Bibload Michelin
    405/70 R20 SPT9 Dunlop
    12.5-20 ATU Firestone
    Buckets
    0.9 m3-1.5 m3 (1.2 yd3-2.0 yd3)
    0.9-1.5 m3
    1.2-2.0 yd3
    1.1-1.3 m3 (1.44-1.7 yd3)
    1.96 yd3
    Hydraulic System
    1.3 s
    22 gal/min
    3400 psi
    34 gal/min
    5.2 s
    2.1 s
    3.2 s
    Operating Specifications
    1.4 yd3
    8311 lb
    9757 lb
    7947 lb
    8 ft in
    3 ft in
    39 degrees
    Service Refill Capacities
    4.4 gal
    20.6 gal
    12.2 gal
    19 gal
    3 gal
    2.9 gal
    18.5 gal
    3 gal
    Cab
    SAE J1040 MAY94, ISO 3471-1994.
    SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
    Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
    When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A) typical.
    Loader Hydraulic System
    27.5 in
    16.4 in
    22 gal/min
    3408 psi
    3408 psi
    2756 psi
    3191 psi
    3.3 in
    2 in
    3.9 in
    2.2 in
    5.5 s
    1.5 s
    2.6 s
    9.6 s
    9.6 s
    3 s
    2.6 s
    22 gal/min
    33 gal/min
    4496 psi
    Maximum Material Densities - General Purpose Bucket
    81 in
    2611 lb/yd
    1.4 yd3
    100 in
    Maximum Material Densities - Light Material Bucket
    82 in
    1743 lb/yd
    2 yd3
    92 in
    Maximum Material Densities - Multi Purpose Bucket
    81 in
    3251 lb/yd
    1.2 yd3
    104 in
    Operating Specifications - Iso Coupler
    1.4 yd3
    4438 lb
    405/70 R20
    10891 lb
    5561 lb
    13712 lb ft
    8874 lb
    52
    Operating Specifications - Ssl Coupler
    1.4 yd3
    4156 lb
    405/70 R20
    10207 lb
    5192 lb
    10566 lb ft
    8311 lb
    52
    Travel Speeds
    6.2 mph
    12.4 mph
    21.7 mph
    Cab Features - Canopy
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Cab Features - Comfort Cab
    Standard
    Optional
    Standard
    Standard
    Standard
    Standard
    Standard
    Optional
    Standard
    Standard
    Standard
    Standard
    Optional
    Optional
    Standard
    Standard
    Standard
    Optional
    Cab Features - Deluxe Cab
    Optional
    Optional
    Optional
    Standard
    Optional
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Dimensions With Bucket (Approximate) - Standard Lift - With Iso Coupler
    8.67 ft in
    1.08 ft in
    7.08 ft in
    18.42 ft in
    2.5 ft in
    3.9 in
    8.58 ft in
    10.5 ft in
    11.17 ft in
    6.75 ft in
    5.08 ft in
    14.83 ft in
    6.75 ft in
    6.5 ft in
    45 degrees
    33 degrees
    39 degrees
    *Vary with bucket.
    **Vary with tire.
    Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
    Dimensions With Bucket (Approximate) - Standard Lift - With Ssl Coupler
    8.67 ft in
    1.08 ft in
    7.08 ft in
    18.92 ft in
    2.83 ft in
    4.2 in
    8.17 ft in
    10.5 ft in
    11.17 ft in
    6.75 ft in
    5.08 ft in
    14.83 ft in
    6.75 ft in
    6.5 ft in
    45 degrees
    33 degrees
    39 degrees
    *Vary with bucket.
    **Vary with tire.
    Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.

  • Caterpillar 908M (2016)

    Specifications
    Engine
    74 hp
    201 cu in
    3.7 in
    4.7 in
    *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards.
    Cat C3.3B DIT*
    Net power ratings are tested at the reference conditions for the specified standard.
    Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
    Flywheel per the SAE reference conditions with the fan at maximum speed.
    74 hp
    73 hp
    73 hp
    74 hp
    192 lb ft
    189 lb ft
    191 lb ft
    The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions.
    73 hp
    74 hp
    Drive Train
    6 mph
    12 mph
    22 mph
    6 mph
    12 mph
    22 mph
    Operational
    14032 lb
    Steering
    3191 psi
    39 degrees
    3.1 in
    1.4 in
    11.8 in
    12 gal/min
    42506 lb ft
    31398 lb ft
    3 s
    <6 turns
    Tires
    Other tire choices available, contact your Cat dealer for details.
    In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
    Weights
    Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort EROPS cab, standard flow hydraulics and skid-steer coupler. - 908M is configured with a 1.1 m3 (1.44 yd3) bucket with bolt-on cutting edge.
    Tires
    Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
    360/80 R20 TRI2 Nokian
    375/75 R20 XZSL Michelin
    400/70 R20 XMCL Michelin
    400/70 R20 Bibload Michelin
    405/70 R20 SPT9 Dunlop
    12.5-20 ATU Firestone
    Buckets
    0.9 m3-1.5 m3 (1.2 yd3-2.0 yd3)
    1.1-1.3 m3 (1.44-1.7 yd3)
    1.96 yd3
    Operating Specifications
    1.4 yd3
    8311 lb
    9757 lb
    7947 lb
    8 ft in
    3 ft in
    39 degrees
    Service Refill Capacities
    4.4 gal
    20.6 gal
    12.2 gal
    19 gal
    3 gal
    2.9 gal
    Cab
    SAE J1040 MAY94, ISO 3471-1994.
    SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
    Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
    When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A) typical.
    Loader Hydraulic System
    27.5 in
    16.4 in
    22 gal/min
    3408 psi
    3408 psi
    2756 psi
    3191 psi
    3.3 in
    2 in
    3.9 in
    2.2 in
    5.5 s
    1.5 s
    2.6 s
    9.6 s
    9.6 s
    3 s
    2.6 s
    22 gal/min
    33 gal/min
    4496 psi
    Dimensions With Bucket (Approximate) - Standard Lift - With Iso Coupler
    8.67 ft in
    1.08 ft in
    7.08 ft in
    18.42 ft in
    2.5 ft in
    3.9 in
    8.58 ft in
    10.5 ft in
    11.17 ft in
    6.75 ft in
    5.08 ft in
    14.83 ft in
    6.75 ft in
    6.5 ft in
    45 degrees
    33 degrees
    39 degrees
    *Vary with bucket.
    **Vary with tire.
    Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
    Dimensions With Bucket (Approximate) - Standard Lift - With Ssl Coupler
    8.67 ft in
    1.08 ft in
    7.08 ft in
    18.92 ft in
    2.83 ft in
    4.2 in
    8.17 ft in
    10.5 ft in
    11.17 ft in
    6.75 ft in
    5.08 ft in
    14.83 ft in
    6.75 ft in
    6.5 ft in
    45 degrees
    33 degrees
    39 degrees
    *Vary with bucket.
    **Vary with tire.
    Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.

  • Caterpillar 908H2 (2012)

    Dimentions
    Dimensions
    1.08333333333333 ft in
    8.69 ft in
    34 degrees
    3.7 in
    45 degrees
    1.2 in
    5 ft in
    1.95 ft in
    11.19 ft in
    10.55 ft in
    6.51 ft in
    8.33 ft in
    10.83 ft in
    4.74 ft in
    18.9 ft in
    20.18 ft in
    3 ft in
    2.81 ft in
    5.15 ft in
    6.82 ft in
    15 ft in
    7.12 ft in
    39 degrees
    6.76 ft in
    Specifications
    Engine
    69 hp
    203 cu in
    3.7 in
    4.7 in
    74 hp
    68 hp
    73 hp
    68 hp
    69 hp
    74 hp
    68 hp
    Operational
    14253 lb
    Transmission
    4.3 mph
    12.4 mph
    21.7 mph
    Buckets
    0.9-1.5 m3 (1.2-2.0 yd3)
    Hydraulic System
    2 Seconds
    5 Seconds
    2.5 Seconds
    3400 psi
    4 Seconds
    22 gal/min
    33 gal/min
    Operating Specifications
    10566 lb
    1.4 yd3
    405/70 R20
    7518 lb
    52 degrees
    3759 lb
    7868 lb
    10527 lb
    6592 lb
    5192 lb
    3045 lb
    2919 lb
    3907 lb
    3822 lb
    5192 lb
    3893 lb
    Service Refill Capacities
    6.3 gal
    20.6 gal
    25 gal
    2.6 gal
    Cab
    SAE J1040 MAY94, ISO 3471-1994
    SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
    Maximum Material Densities - General Purpose
    1.4 yd3
    100 in
    2611 lb/yd
    81 in
    Maximum Material Densities - Light Material
    2 yd3
    92 in
    1743 lb/yd
    82 in
    Maximum Material Densities - Multi Purpose
    1.18 yd3
    104 in
    3251 lb/yd
    81 in
    Operator Environment Features - Canopy
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Operator Environment Features - Comfort Cab
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Optional
    Optional
    Operator Environment Features - Deluxe Cab
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard
    Optional
    Optional
    Standard
    Standard
    Standard
    Standard
    Standard
    Standard