عدد الإعلانات: 81

مستعمل Caterpillar 60 ملحقات

يرجى العثور أدناه على الإعلانات المبوبة لـ # category_top3 المستخدمة للبيع. يمكنك استخدامها حسب سنة الإنتاج أو السعر أو ساعات العمل أو البلد. لتضييق نطاق البحث ، يرجى استخدام شريط التنقل الموجود على الجانب الأيسر.
اقرأ المزيد حول Caterpillar ملحقات في قسم العلامات التجارية.

قراءة المزيد إغلاق
عامل التصفية الحالي
إعلانات/ صفحة
  • Caterpillar 60، 2008، رافعات الطرق الوعرةCaterpillar RT 760تحمل علامة EPA: نعم, الإطارات الأمامية / محمل السيارة المتبقي: 70%, Certificates: EPA

    رافعات الطرق الوعرة
    2008 4,600 h
    الإمارات العربية المتحدة, UAE

    السعر عند توقيع الطلب
  • Caterpillar 60، 2000، مكونات أخرىCaterpillar Hydraulic motor AA2FM250/60W-VB51-S01

    مكونات أخرى
    2000
    بولندا, Kojszówka

    السعر عند توقيع الطلب
  • Caterpillar 60، 2017، مولدات ديزلCaterpillar GENSET 60

    مولدات ديزل
    2017 3,132 h
    الولايات المتحدة الأمريكية, CA

    35,583 EUR
  • Caterpillar 60، 1991، مناولات متداخلةCaterpillar RTC 60

    مناولات متداخلة
    1991
    إسبانيا, Córdoba

    10,000 EUR
  • Caterpillar 60، 2015، حفارات يجاروف أماميCaterpillar 6015محرك: Cat C-18, الوزن القائم: 105500, ناتج المحرك: 700, سعة البطارية: 6e+006, Track width: 60, أبعاد النقل (طول×عرض×ارتفاع): 7 x 4.4 x 3.5 , اللون الأصلي: Yes, بلد الإنتاج: DE

    حفارات يجاروف أمامي
    2015 12,700 h
    إستونيا, Kiviõli

    299,000 EUR
  • Caterpillar 60، 2013، مطارق / كساراتCaterpillar H160ES

    مطارق / كسارات
    2013 1,422 h
    الولايات المتحدة الأمريكية, Tucson, AZ

    83,391 EUR
  • Caterpillar 60، قطاعاتCaterpillar VT60 B Jawيصلح للماكينات التالية: bouwmachine, وزن النقل: 2219

    قطاعات

    هولندا, nl, 's Hertogenbosch

    السعر عند توقيع الطلب
  • Caterpillar 60، 2018، مكونات أخرىCaterpillar BIC_ 400A_ 600V

    مكونات أخرى
    2018 1 h
    كندا, Pointe-claire, QC

    13,650 EUR
  • Caterpillar 60، 2013، مولدات أخرىCaterpillar APS600التقييم العام (1-5): 3

    مولدات أخرى
    2013 4,313 h
    بورتوريكو

    144,868 EUR
  • Caterpillar 60، مكونات أخرىCaterpillar 169-6460يصلح للماكينات التالية: Référence CAT : 169-6460 Pour série TH

    مكونات أخرى

    فرنسا

    600 EUR
  • Caterpillar 60، 2000، مكونات أخرىCaterpillar Rod 160-8179

    مكونات أخرى
    2000
    بولندا, Kojszówka

    السعر عند توقيع الطلب
  • Caterpillar 60، 2015، مطارق / كساراتCaterpillar H 160 E Sالتقييم العام (1-5): 3

    مطارق / كسارات
    2015
    المكسيك, Gomez Palacio

    35,040 EUR
  • Caterpillar 60، 2013، مولدات أخرىCaterpillar APS600التقييم العام (1-5): 3

    مولدات أخرى
    2013 3,736 h
    بورتوريكو

    135,814 EUR
  • Caterpillar 60، 2014، مطارق / كساراتCaterpillar H160ES

    مطارق / كسارات
    2014 11,112 h
    الولايات المتحدة الأمريكية, Harrisburg, PA

    92,354 EUR
  • Caterpillar 60، 2018، مطارق / كساراتCaterpillar H 160 E S

    مطارق / كسارات
    2018 8 h
    المكسيك, Chihuahua

    62,927 EUR
  • Caterpillar 60، 2017، مطارق / كساراتCaterpillar H160ES

    مطارق / كسارات
    2017 303 h
    الولايات المتحدة الأمريكية, Apache Junction, AZ

    69,488 EUR
  • Caterpillar 60، 2012، حفارات زحافةCaterpillar 6040التقييم العام (1-5): 3

    حفارات زحافة
    2012
    هولندا, Vlissingen

    السعر عند توقيع الطلب
  • Caterpillar 60، 2013، معدات تعدينCaterpillar 6018التقييم العام (1-5): 3

    معدات تعدين
    2013 2,248 h
    الصين, 成都

    السعر عند توقيع الطلب
  • Caterpillar 60، 2014، معدات تعدينCaterpillar 6018

    معدات تعدين
    2014 1 h
    الهند, Panvel

    السعر عند توقيع الطلب
  • Caterpillar 60، 2000، هيدرولياتCaterpillar Main pump AA8VO107SRH/60R1-VZG05G

    هيدروليات
    2000
    بولندا, Kojszówka

    السعر عند توقيع الطلب
صفحة
إنشاء التنبيه
Caterpillar 60 specs

  • Caterpillar 6015/6015 FS (2012)

    Dimentions
    Undercarriage
    Specifications
    Electrical System
    2 x 210 Ah
    2 x 170 Ah
    210 Ah-24 V
    170 Ah-24 V
    150 A
    175 A
    6 x Halogen lights
    24 V
    Swing System
    Compact planetary transmission with axial piston motor
    Triple race roller bearing with sealed internal gearing
    5.1 rpm
    5.4 rpm
    Wet multiple disc brake, spring loaded/hydraulically released
    Operator'S Cab
    approx. 4.3 m (14 ft 1 in)
    Length: 1 800 mm (5 ft 11 in); Width: 1 300 mm (4 ft 3 in); Height: 1 900 mm (6 ft 3 in)
    General
    Cat C18 - 522 kW (700 hp); Cummins QSK19 - 477 kW (640 hp)
    Face Shovel (SAE 2:1) - 7 m3 (9.2 yd3); Std. rock backhoe (SAE 1:1) - 6 m3 (7.8 yd3); M.E. backhoe (SAE 1:1) - 7 m3 (9.2 yd3)
    343 gal
    Automatic Lubrication System
    2.1 gal
    Diesel Engines - Version 1 - Cat® C18 Tier 3
    Cat C18
    496 kW (665 HP) 1,800 min-1
    496 kW (665 HP) 1,800 min-1
    522 kW (700 HP) 1,800 min-1
    6
    5.7 in
    7.2 in
    1105 cu in
    Turbocharged and charge air cooled
    1 500 m (4,900 ft) a.s.l.
    US EPA Tier 4i; Europe NRMM Tier III B
    Diesel Engines - Version 2 - Cummins® Qsk19 Tier 1
    Cummins QSK19
    453 kW (607 HP) 1,800 min-1
    453 kW (607 HP) 1,800 min-1
    477 kW (640 HP) 1,800 min-1
    6
    6.25 in
    6.25 in
    1159 cu in
    Turbocharged and aftercooled
    3 100 m (10,200 ft) a.s.l.
    Hydraulic Oil Cooling
    123 gal/min
    131 gal/min
    3.05 ft in
    Hydraulic System With Pump Managing System
    2 x variable swash plate pumps
    approx. 1 700 L (449 US gal)
    approx. 1 300 L (343 US gal)
    32 MPa = 320 bar (4,640 psi)
    2 x 552 L/min (2 x 146 US gal/min)
    2 x 587 L/min (2 x 155 US gal/min)
    30 MPa = 300 bar (4,350 psi)
    Reversible swash plate pump
    76 gal/min
    81 gal/min
    Operating Weights With Standard Undercarriage - Backhoe Unit - Cat® C18
    23.6 in
    232810 lb
    16.7 N/cm2 (24.2 psi)
    13.6 N/cm2 (19.7 psi)
    14.44 ft in
    29.5 in
    14.93 ft in
    235890 lb
    Operating Weights With Standard Undercarriage - Backhoe Unit - Cummins® Qsk19
    16.4 N/cm2 (23.8 psi)
    227740 lb
    230820 lb
    13.3 N/cm2 (19.3 psi)
    Operating Weights With Standard Undercarriage - Shovel Unit - Cat® C18
    23.6 in
    14.44 ft in
    231920 lb
    16.7 N/cm2 (24.2 psi)
    29.5 in
    14.93 ft in
    235010 lb
    13.5 N/cm2 (19.6 psi)
    Operating Weights With Standard Undercarriage - Shovel Unit - Cummins® Qsk19
    226850 lb
    16.3 N/cm2 (23.6 psi)
    229940 lb
    13.2 N/cm2 (19.1 psi)

  • Caterpillar 6090 FS (2013)

    Dimentions
    Undercarriage
    0.9 mph
    1.2 mph
    Specifications
    Swing System
    Six compact planetary transmissions with axial piston motors
    Triple race roller bearing with sealed internal gearing
    Wet multiple disc brake, spring-loaded/hydraulically released
    Closed-loop swing circuit with torque control
    Hydraulic braking of the swing motion by counteracting control
    All race ways of swing ring as well as grease bath for internal gearing supplied by automatic central lubrication system
    3.9 rpm
    Engine
    4500 hp
    4500 hp
    2 Cummins QSK60
    Bucket
    68 yd3
    Operating Specifications
    227075.86 lb
    2429491.24 lb
    Operator'S Cab
    Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head and armrests
    Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
    Joystick controls integrated in independently adjustable seat consoles
    Fold-away auxiliary seat with safety belt
    FOPS (rock guard; approved according to ISO 10262:1998) integrated into cab structure
    All-round safety glass, armored windshield and sliding side window
    Windshield with parallel intermittent wiper/washer
    Roller blinds at all windows
    External sun shields at side windows
    Machine access via retractable access stairway, stairway angle approximately 45 degrees, hydraulically operated
    28.87 ft in
    7.22 ft in
    5.25 ft in
    7.05 ft in
    Under roof mounted heating, ventilating and air conditioning system
    Sliding emergency ladder (kick-down type) with ladder cage
    5.25 ft in
    5.25 ft in
    7.05 ft in
    Electronic monitoring, data logging and diagnostic system for vital signs and service data of engines, hydraulic system and lubrication system, featuring:
    Robust instrument panel including large (12 in) colored touch-screen for intuitive handling
    On-screen PDF documentation (e.g. operating instructions, technical handbook, spare parts catalog, electric circuit diagram)
    On-screen troubleshooting assistance
    Graphic charts of logged data
    Fault memory with storage of related conditions
    USB, Lan (TCP/IP) and CAN BUS interfaces for data export
    General
    3360 kW (4,500 hp)
    Face Shovel (heaped 2:1) - 52.0 m3 (68.0 yd3)
    Face Shovel - 1000 tonnes (1,102 tons)
    Operating Weights
    Other track pads available on request
    6.56 ft in
    2204600 lb
    38.3 psi
    Automatic Lubrication System
    264 gal
    Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times
    Connected to the lubrication system are:
    Raceways of the swing roller bearing
    Pivot points of attachment, bucket and cylinders
    Bottom rollers of undercarriage
    System failures displayed by Board Control System
    Grease filters (200 m) between service station and container as well as directly behind grease pump
    Hydraulic Oil Cooling
    4 975 L/min (4 258 gal/min)
    Gear-type cooling pumps supplying high-volume, low-pressure oil to aluminum coolers
    Fan speed is thermostatically controlled
    Extremely high cooling efficiency to ensure optimum oil temperature
    Cooling system is fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
    Hydraulic System With Pump Managing System
    8 variable flow axial piston pumps
    4350 psi
    5220 psi
    5080 psi
    6 reversible swash plate pumps
    3450 gal
    2640 gal
    Electronic load limit control
    Flow on demand from main pumps depending on joystick position
    Automatic regulation of main pumps to zero flow without demand
    Automatic RPM reduction of engine speed during working breaks
    Reduced oil flow of main pumps at high hydraulic oil temperature or engine temperature
    Pressure cut-off for main pumps
    Cooling of pump transmission gear oil
    Full-flow high-pressure filters (100 m) for the main pumps, installed directly behind each pump
    High pressure filters (100 m) for the closed swing circuit
    Full-flow filters (10 m) for the complete return circuit
    Full-flow filters (10 m) for the cooling return circuit
    Pressure filters (40 m and 6 m) for servo circuit
    Transmission oil filters (40 m)
    8 936 L/min (8 247 gal/min)
    6 488 L/min (6 129 gal/min)
    Diesel Engines
    2 QSK60 two-stage
    6.25 in
    7.48 in
    3674 cu in
    Two-stage turbocharged; aftercooled and intercooled
    4330 gal
    Heavy-duty air filters with automatic dust evacuation
    Micro processed engine control
    Hydraulically driven radiator fan with electronically controlled fan speed
    Two-stage fuel filter includes water separator
    Pre-lube starting system
    3360 kW 1,800 min-1 (4,500 hp 1,800 min-1)
    16
    Emits equivalent to U.S. EPA Tier 2
    3360 kW 1,800 min-1 (4,500 hp 1,800 min-1)
    16000 ft in
    Eliminator with centrifuge for engine oil filtration
    Engine-oil-change interval of 1,000 hours
    Additional high-capacity water separator
    3360 kW 1,800 min-1 (4,500 hp 1,800 min-1)
    Electrical System - Diesel Drive
    24V
    Battery isolation relays
    Emergency stop switches accessible from ground level, in engine module and in operator's cab
    6 210 Ah 12V each; 630 Ah 24V in total
    2 175A each
    12 high brightness LED lights
    Retractable Service Station
    Retractable service station installed underneath the engine module and easily accessible from ground
    Quick couplings for:
    Diesel fuel
    Engine coolant left/right
    Pump transmission gear oil left/right
    Swing transmissions gear oil each
    Engine oil (oil pan) left/right
    Engine oil (additional tank optional) left/right
    Hydraulic oil tank
    Grease container
    Cat jump-start socket
    Indicator lights for fuel tanks left/right full and grease container full
    Attachment
    Inspection hole in boom and stick
    Pressure-free lowering of boom and stick by means of a float valve
    Special wear packages for highly abrasive materials on request
    Catwalks with rails at boom
    Welding procedures allow for internal counter-welding (double prep weld) wherever possible
    Special liner material covering main wear areas inside and outside of bucket
    Lip shrouds between teeth
    Wing shrouds on side walls
    Heel shrouds at bottom edges
    Horizontal automatic constant-angle bucket guidance
    Vertical automatic constant-angle bucket guidance
    Automatic roll-back limiter to prevent material spillage
    Kinematic assistance to hydraulic forces
    Constant boom momentum throughout the entire lift arc
    Crowd force assistance
    Boom and stick are stress-relieved after welding
    Boom and stick are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas

  • Caterpillar 6060/6060 FS (2012)

    Dimentions
    Undercarriage
    0.87 mph
    1.24 mph
    Specifications
    Swing System
    4 compact planetary transmissions with axial piston motors
    Triple-race roller bearing with sealed internal gearing
    Wet multiple disc brake, spring loaded/hydraulically released
    Hydraulic braking of the swing motion by counteracting control
    Closed-loop swing circuit with torque control
    Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
    3.8 rpm
    All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system
    Engine
    3000 hp
    3000 hp
    2 Cat 3512C
    Electric drive option available (1800 kW) on 6060 AC/6060 AC FS
    Bucket
    44.5 yd3
    44.5 yd3
    Operating Specifications
    134000 lb
    1300000 lb
    1298000 lb
    Operator'S Cab
    Robust instrument panel including large colored BCS screen with transflective technology
    Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, safety belt, head and armrests
    Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
    External sun shields at side and rear windows
    Fold-away auxiliary seat with safety belt
    FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
    All-round safety glass, armored windshield and sliding side window
    Windshield with parallel intermittent wiper/washer
    Under roof mounted heating ventilating and air conditioning system
    Joystick controls integrated in independently adjustable seat consoles
    24.93 ft in
    7.22 ft in
    5.25 ft in
    7.05 ft in
    Electronic monitoring & data logging system for vital signs & service data of engines, hydraulic system & lubrication system
    Sliding emergency ladder (kick-down type) with ladder cage
    Machine access via retractable access stairway, stairway angle approximately 45 degrees, hydraulically operated
    Roller blinds at all windows
    General
    Cat 3512C - 2240 kW (3,000 hp)
    Face Shovel (heaped 2:1) - 34.0 m3 (44.5 yd3); Backhoe (heaped 1:1) - 34.0 m3 (44.5 yd3)
    Face Shovel - 569 tonnes (627 tons); Backhoe - 570 tonnes (628 tons)
    Operating Weights
    Other track pads available on request.
    4.59 ft in
    1254200 lb
    25.4 N/cm2 (36.8 psi)
    4.59 ft in
    1257280 lb
    25.5 N/cm2 (37.0 psi)
    4.59 ft in
    1204370 lb
    24.4 N/cm2 (35.4 psi)
    4.59 ft in
    1207460 lb
    24.5 N/cm2 (35.6 psi)
    Automatic Lubrication System
    264 gal
    System failures displayed by Board Control System
    Connected to main lube system are: - pivot points of attachment, bucket and cylinders - bottom rollers of undercarriage
    Grease filters (200 m) between service station and container as well as directly behind grease pump
    Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
    Connected to main lube system are: - raceways of swing roller bearing - 2 greasing pinions for the internal gearing of swing ring
    Hydraulic Oil Cooling
    4 488 L/min (4 129 gal/min)
    Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
    Extremely high cooling efficiency to ensure optimum oil temperature
    Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
    Fan speed and flow of oil to the coolers are thermostatically controlled
    Hydraulic System With Pump Managing System
    4 1300 L/min (4 343 gal/min)
    4 352 L/min (4 93 gal/min)
    4 reversible swash plate pumps
    4 swash plate double pumps
    4 933 L/min (4 246 gal/min)
    4640 psi
    5365 psi
    3 491 L/min (3 131 gal/min)
    5365 psi
    4 variable flow axial piston pumps
    3 reversible swash plate pumps
    1930 gal
    2483 gal
    1876 gal
    1320 gal
    Attachments
    Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas
    Welding procedures allow for internal counter-welding (double prep weld) wherever possible
    Booms and sticks are stress-relieved after welding
    Catwalks with rails at booms
    Inspection holes in booms (FS and BH) and stick (FS)
    Guards for shovel cylinders (FS)
    Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
    - Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance
    - Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces
    - Constant boom momentum throughout the entire lift arc - Crowd force assistance
    - Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth
    - Wing shrouds on side walls - Heel shrouds at bottom edges
    Special wear packages for highly abrasive materials on request
    Diesel Engines
    2 Cat 3512C (Tier 2)
    6.69 in
    8.46 in
    3574 cu in
    Turbocharged and charge air-cooled
    3435 gal
    Heavy-duty air filters
    Microprocessed engine management
    Hydraulically driven radiator fan with electronically controlled fan speed
    Two-stage fuel filter including water separator
    Additional high-capacity water separator
    2240 kW 1,800 min-1 (3,000 hp 1,800 min-1)
    12
    9800 ft in
    2 150 A
    U.S. EPA flex
    2240 kW 1,800 min-1 (3,000 hp 1,800 min-1)
    2240 kW 1,800 min-1 (3,000 hp 1,800 min-1)
    Electric Motor - 6060 Ac/6060 Ac Fs
    Squirrel cage induction motor
    2414 hp
    6.6 kV 10% (other on request)
    194 A (at 6.6 kV)
    50 Hz (60 Hz on request)
    1500 min-1 (1,800 min-1 at 60 Hz)
    350% of IN (197% of IN Optional)
    Electrical System - Diesel Drive
    24V
    16 LED service lights
    Battery isolation relays and switches
    6 210 Ah - 12V each; 630 Ah - 24V in total
    12 LED high-brightness working flood lights - 10 for working area - 2 for rear end
    2 LED high-brightness access flood lights
    Emergency stop switches accessible from ground level and in engine module
    Retractable Service Station
    Retractable service station installed underneath the engine module and easily accessible from ground.

  • Caterpillar 6015B

    Dimentions
    Undercarriage
    192886 lb ft
    220987 lb ft
    1.3 mph
    2.1 mph
    Specifications
    Electrical System
    150A (24V)
    4 200Ah (12V each)
    24V
    Swing System
    Two (2) compact planetary transmissions with axial piston motors
    Cross roller bearing with sealed internal gearing
    Wet multiple disc brake, spring-loaded/hydraulically released
    Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking
    Closed-loop swing circuit with speed control
    4.9 rpm
    Engine
    U.S. EPA Tier 4 Final, Tier 2 Equivalent or Tier 1 Equivalent
    813 hp
    Cat C27 ACERT
    Operational
    339511.48 lb
    Weights
    231485 lb
    Bucket
    10.6 yd3
    Hydraulic System
    3 variable swash plate pumps
    407 gal/min
    4641 psi
    4641 psi
    1 variable swash plate pump
    127 gal/min
    5294 psi
    284 gal/min
    40 in
    Operating Specifications
    32000 lb
    Service Refill Capacities
    44 gal
    449 gal
    253 gal
    463 gal
    23 gal
    2.4 gal
    18 gal
    General
    606 kW (813 hp)
    Backhoe (heaped 1:1) 8.1 m3 (10.6 yd3)
    140 tonnes (154 tons)
    Track
    28 in
    36 in
    39 in
    Automatic Lubrication System
    18 gal
    Central bank lubrication system

  • Caterpillar 6060 AC/6060 AC FS (2018)

    Dimentions
    Undercarriage
    0.87 mph
    1.24 mph
    Specifications
    Swing System
    4 compact planetary transmissions with axial piston motors
    Triple-race roller bearing with sealed internal gearing
    Wet multiple disc brake, spring loaded/hydraulically released
    All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system
    Hydraulic braking of the swing motion by counteracting control
    Closed-loop swing circuit with torque control
    3.8 rpm
    Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
    Operating Specifications
    1208000 lb
    134000 lb
    1210000 lb
    134000 lb
    Operator'S Cab
    External sun shields at side and rear windows
    Under roof mounted heating ventilating and air conditioning system
    Windshield with parallel intermittent wiper/washer
    All-round safety glass, armored windshield and sliding side window
    Operator Protective Guard (Top Guard approved according to ISO 10262:1998)
    Fold-away auxiliary seat with safety belt
    Joystick controls integrated in independently adjustable seat consoles
    Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
    Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, safety belt, head and armrests
    Roller blinds at all windows
    24.93 ft in
    7.22 ft in
    5.25 ft in
    7.05 ft in
    Robust instrument panel including large colored BCS screen with transflective technology
    Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of electric motor, hydraulic system and lubrication system
    Machine access via retractable access stairway, stairway angle approximately 35 degrees, hydraulically operated
    Sliding emergency ladder (kick-down type) with ladder cage
    General
    Face Shovel (heaped 2:1) - 34.0 m (44.5 yd); Backhoe (heaped 1:1) - 34.0 m (44.5 yd)
    Face Shovel - 549 tonnes (605 tons); Backhoe - 548 tonnes (604 tons)
    1800 kW (2,414 hp)
    Operating Weights
    Other track pads available on request.
    4.59 ft in
    1210330 lb
    24.5 N/cm (35.6 psi)
    4.59 ft in
    1208120 lb
    24.5 N/cm (35.6 psi)
    Automatic Lubrication System
    264 gal
    Connected to the main lubrication system are:
    raceways of the swing roller bearing
    two greasing pinions for the internal gearing of the swing ring
    pivot points of attachment, bucket and cylinders
    bottom rollers of undercarriage
    Grease filters (200 m) between service station and container as well as directly behind grease pump
    System failures displayed by Board Control System
    Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
    Hydraulic Oil Cooling
    2 486/2 474 L/min (2 128/2 125 gal/min)
    Fan speed and flow of oil to the coolers are thermostatically controlled
    Cooling system is fully independent of all main circuits, i.e. controlled cooling capacity is available whenever motor is running
    Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
    Extremely high cooling efficiency to ensure optimum oil temperature
    Hydraulic System With Pump Managing System
    4 variable flow axial piston pumps
    4640 psi
    5365 psi
    5365 psi
    3 reversible swash plate pumps
    2483 gal
    1320 gal
    Electronic power limit control
    Flow on demand from main pumps depending on joystick position
    Automatic regulation of main pumps to zero flow without demand
    Automatic oil flow reduction of main pumps at:
    • Low line voltage to prevent overheating of motor
    • Hydraulic temperature below + 20 degrees C (68 degrees F)
    • Preset maximum hydraulic temperature
    • Preset maximum motor temperature
    Pressure cut-off for main pumps
    Cooling of pump transmission gear oil
    Full-flow high-pressure filters (100 m) for the main pumps, installed directly behind each pump
    High pressure filters (200 m) for the closed swing circuit
    Full-flow filters (10 m) for the complete return circuit
    Pressure filters (40 m and 6 m) for servo circuit
    Pressure filters (40 m) for the feed pumps of the closed swing circuit
    Transmission oil filters (40 m)
    4 925 L/min (4 244 gal/min)
    3 486 L/min (3 128 gal/min)
    Attachments
    Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
    Inspection holes in booms (FS and BH) and stick (FS)
    Guards for shovel cylinders (FS)
    Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas
    Catwalks with rails at booms
    Welding procedures allow for internal counter-welding (double prep weld) wherever possible
    Booms and sticks are stress-relieved after welding
    Horizontal automatic constant-angle bucket guidance
    Vertical automatic constant-angle bucket guidance
    Automatic roll-back limiter to prevent material spillage
    Kinematic assistance to hydraulic forces
    Constant boom momentum throughout the entire lift arc
    Crowd force assistance
    Special liner material covering main wear areas inside and outside of bucket
    Lip shrouds between teeth
    Wing shrouds on side walls
    Heel shrouds at bottom edges
    Special wear packages for highly abrasive materials on request
    Electric Motor - 6060 Ac/6060 Ac Fs
    Squirrel cage induction motor
    2414 hp
    6.6 kV 10% (other on request)
    185 A (at 6.6 kV)
    50 Hz (60 Hz on request)
    1,500 min-1 (1,800 min-1 at 60 Hz)
    450% of IN (253% of IN Optional)
    2000 m above sea level (6,600 ft above sea level)
    Custom-made electric motor with increased gap between rotor and stator to withstand severe mining conditions
    Power limit control by Pump Managing System
    Retractable Service Station
    Retractable service station installed underneath the engine module and easily accessible from ground.
    Quick couplings for:
    Pump transmission gear oil left/right
    Hydraulic oil tank
    Grease container
    Electric Motor
    2414 hp
    Standard Bucket Capacity
    44.5 yd3
    44.5 yd3