بحث المعدات المستخدمة إغلاق » بحث متقدم

    إنشر إعلانك المطلوب
    عدد الإعلانات: 8

    مستعمل Caterpillar 730 شاحنات

    هنا يمكنك العثور على جميع Caterpillar 730, 730 C شاحنات ads المستخدمة للبيع. يمكنك الاتصال مباشرة ببائع Caterpillar 730, 730 C شاحنات المستخدم المستخدم مع بيانات جهة اتصال محددة.
    اقرأ المزيد عن Caterpillar شاحنات في قسم الماركات.
    قراءة المزيد إغلاق
    عامل التصفية الحالي
    إعلانات/ صفحة
    صفحة
    إنشاء التنبيه
    Caterpillar 730 specs

    • Caterpillar 730C2 Bare Chassis

      Dimentions
      Dump
      68343.22 lb
      Specifications
      Engine
      763 cu in
      5.12 in
      6.18 in
      367 hp
      375 hp
      Cat C13
      370 hp
      12500 ft in
      1579 lb ft
      1564 lb ft
      1200 rpm
      Cat C13 ACERT
      Transmission
      5 mph
      9 mph
      14 mph
      21 mph
      29 mph
      34 mph
      6 mph
      Steering
      4.75 seconds @ 60 rpm
      Service Refill Capacities
      21.9 gal
      108.8 gal
      10.5 gal
      9.2 gal
      29.1 gal
      35.7 gal
      6.3 gal
      5.3 gal
      Standards
      ISO 3449 Level II - 2005
      ISO 3471 - 2008
      ISO 3450 - 2011
      ISO 5010 - 2007
      Sound Levels
      76 dB(A)
      Turning Circle
      Dimensions are for machines equipped with 23.5R25 tires.
      45 degrees
      294 in
      318 in
      153 in
      210 in
      Wheel Base Length
      156.7 in
      215.2 in

    • Caterpillar 730C2 (2016)

      Dimentions
      Dump
      68343.22 lb
      Specifications
      Engine
      762.8 cu in
      5.1 in
      6.2 in
      The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
      367 hp
      375 hp
      Cat C13 ACERT
      370 hp
      The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
      The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
      Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
      DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
      1579 lb ft
      1200 rpm
      Cat C13 ACERT
      1564 lb ft
      12500 ft in
      Transmission
      5 mph
      9 mph
      14 mph
      21 mph
      29 mph
      34 mph
      6 mph
      Steering
      4.75 seconds @ 60 rpm
      Service Refill Capacities
      21.9 gal
      108.8 gal
      5.2 gal
      10 gal
      12.4 gal
      29.1 gal
      33 gal
      6.3 gal
      Standards
      ISO 3449 Level II 2005
      ISO 3471 2008
      ISO 3450 2011
      ISO 5010 2007
      Operating Weights
      32882 lb
      9987 lb
      9436 lb
      52305 lb
      7231 lb
      27249 lb
      27249 lb
      61729 lb
      40113 lb
      37236 lb
      36685 lb
      114034 lb
      Sound Levels
      76 dB(A)
      The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
      Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
      Turning Circle
      Dimensions are for machines equipped with 23.5R25 tires.
      294 in
      318 in
      153 in
      210 in
      Body Capacities
      23 yd3
      17.4 yd3
      18.2 yd3
      24.6 yd3
      Body Hoist
      12 s
      8 s
      Body Plate Thickness
      0.28 in
      0.43 in
      0.51 in
      0.51 in
      Body Plate
      High strength Brinell HB450 wear resistant steel

    • Caterpillar 730C2 EJ (2016)

      Dimentions
      Dump
      68343.22 lb
      Specifications
      Engine
      762.8 cu in
      5.1 in
      6.2 in
      The 730C2 EJ meets Tier 4 Final/Stage IV emission standards.
      367 hp
      375 hp
      Cat C13 ACERT
      370 hp
      The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4.
      The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
      The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
      Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
      DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
      1579 lb ft
      1200 rpm
      Cat C13 ACERT
      1564 lb ft
      12500 ft in
      Transmission
      5 mph
      9 mph
      14 mph
      21 mph
      29 mph
      34 mph
      6 mph
      Steering
      4.75 seconds @ 60 rpm
      Service Refill Capacities
      21.9 gal
      108.8 gal
      5.2 gal
      10 gal
      12.4 gal
      29.1 gal
      33 gal
      6.3 gal
      Standards
      ISO 3449 Level II 2005
      ISO 3471 2008
      ISO 3450 2011
      ISO 5010 2007
      Operating Weights
      34535 lb
      12103 lb
      11552 lb
      58190 lb
      7231 lb
      27249 lb
      27249 lb
      61729 lb
      36013 lb
      42362 lb
      41811 lb
      120186 lb
      Sound Levels
      76 dB(A)
      The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT 98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
      Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
      Turning Circle
      Dimensions are for machines equipped with 750/65 tires.
      294 in
      318 in
      153 in
      210 in
      Body Capacities
      22.1 yd3
      17.7 yd3
      Body Plate
      High strength Brinell HB450 wear resistant steel
      Body Eject
      12 s
      15 s

    • Caterpillar 730 Ejector (2009)

      Dimentions
      Dump
      31 lb
      Specifications
      Engine
      680 cu in
      5.1 in
      5.5 in
      321 hp
      319 hp
      325 hp
      Cat C11 ACERT
      321 hp
      Transmission
      5 mph
      9 mph
      14 mph
      21 mph
      29 mph
      34 mph
      5 mph
      Service Refill Capacities
      18 gal
      94 gal
      11 gal
      9.5 gal
      46.5 gal
      43.3 gal
      4.8 gal
      Standards
      ISO 3449 Level II 2005
      ISO 3471 2008
      ISO 3450 1996
      ISO 5010 2007
      Operating Weights
      30821 lb
      13140 lb
      12368 lb
      56328 lb
      1984 lb
      30005 lb
      30005 lb
      61994 lb
      32805 lb
      43144 lb
      42373 lb
      118322 lb
      Sound Levels
      76 dB(A)
      Body Capacities
      22.1 yd3
      17.7 yd3
      Body Plate Thickness
      0.24 in
      0.24 in
      0.35 in
      Ejector Cycle Times
      12 s
      15 s

    • Caterpillar 730 EJ (2018)

      Specifications
      Engine
      763 cu in
      5.1 in
      6.2 in
      The 730 EJ meets Tier 4 Final/Stage IV emission standards.
      367 hp
      375 hp
      Cat C13 ACERT
      370 hp
      The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
      The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
      The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
      Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions.
      DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
      1579 lb ft
      1564 lb ft
      1200 rpm
      Cat C13 ACERT
      12500 ft in
      Transmission
      5 mph
      9 mph
      14 mph
      21 mph
      29 mph
      34 mph
      6 mph
      Steering
      4.75 seconds @ 60 rpm
      Weights
      60000 lb
      Service Refill Capacities
      21.9 gal
      108.8 gal
      5.3 gal
      10 gal
      12.4 gal
      29.1 gal
      33 gal
      6.3 gal
      Standards
      ISO 3449 Level II 2005
      ISO 3471 2008
      ISO 3450 2011
      ISO 5010 2007
      Operating Weights
      34723 lb
      12214 lb
      11707 lb
      58643 lb
      1433 lb
      29156 lb
      29156 lb
      59745 lb
      35009 lb
      41502 lb
      41017 lb
      117528 lb
      Sound Levels
      72 dB(A)
      The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
      Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
      Turning Circle
      Dimensions are for machines equipped with 750/65 R25 tires.
      294 in
      318 in
      152 in
      214 in
      Body Capacities
      22.1 yd3
      17.7 yd3
      Body Plate
      High strength Brinell HB450 wear resistant steel
      Optimal Loader/Truck Pass Matching
      An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
      45
      56
      34
      4
      45
      5
      Eject/Retract Times
      12 s
      15 s